Overview: FQL450S is a fully automatic unmanned operation of the L-type sealer is widely used in the packaging of the assembly-line production, automatic film feeding punch, automatic envelope sealing, automatic take-up of waste; only manual adjustment guide membrane system and manually adjusting the feed conveyor platform for different width and height of the products, with supporting the use of automated packaging line. Scope: Widely used in high-volume software, food, cosmetics, printing, pharmaceutical and floor, ceramic, beverages, metal and other industries shrink packaging. Technical parameters: Model FQL450S power 1.5KW power supply 220V / 50HZ maximum package size H ≦ 125 L + 2H ≦ 550 W + 2H ≦ 450 mm Maximum seal size L550 × W450 mm Table height 780 + 50mm efficiency 15-30 packs / min Working Pressure 5 (Kg / cm2)) noise ≤75DB Machine weight 300Kg Machine size L1550 × W790 × H1470 mm steps: 1, left and right input 6kg / cm2 pressure, then seal cutter rise. 2, installed shrink film. 3, access to 220v power supply, turn on the power switch at this time the heating start immediately. Be sure to select switch in the manual position. 4, adjust the position of the supply conveyor belt, to make the packaging just fit through. 5. Adjust the height of the triangle is slightly higher than the height of the packaging. 6, hand pulled fold shrink film opening side, and then import the traction chain entrance, with the other hand on the table button to send film, both films are imported chain. (Note that finger-safe) 7, after which the film import chain, if the heating temperature has reached the set value, either by hand countertop cut buttons for manual closure sealing and cutting. (Manual sealing and cutting time in about 1 second) 8, after the closure of all completed, then you can choose to switch to automatic transmission, try automatic packaging, and other waste scrap length enough to feed head tied to the receipt tray.