Features: jet shrink packaging machine is the newest type of automatic continuous shrink packaging equipment, heat pipe heating, saving (saving more than 15%); shrinkage temperature and motor drive speed is adjusted, and the adjustment range wide; original jet devices. Therefore, this product has advanced design, performance is extremely stable and reliable, packaging shrink effect is good, beautiful novel structure, convenient operation and maintenance features, and product life was significantly higher than similar products, ordinary jet shrink packaging machine suitable for PVC, POF, PP shrink film such as shrink wrap. Especially for PVC shrink film shrink packaging. Technical parameters: Model BS4525N Power 380V/50Hz Power 12KW load conveyor speed 0-10M/min 30Kg Shrink Size 1500 × 450 × 250 mm Machine size 1900 × 720 × 1300 mm Weight 150kg Operating Procedures: 1, close the power switch , the power is turned on, starting the conveyor belt, about 5 minutes warm-up, close the fan switch. At this point, according to the article size, film thickness, temperature control knob to adjust the upper and lower chamber and conveyor speed, after commissioning to achieve the requirements, you can shrink packaging. 2, the actual situation, if the excessive shrinkage wrinkles can reduce or increase the heating temperature of the conveying speed, on the contrary, such as shrinkage phenomenon occurred, the temperature can reduce the conveying speed or speed. 3, after the end of the operation, turn off the heating switch, so that the hot air transport motor and the motor continues to run about 10 minutes, then cut off the entire power supply.